{"title":"BMW M3 (E92)","description":"","products":[{"product_id":"bmc-air-filter-fb536-08-bmw-m3-e90-e92-e93-u-s-2010-2013","title":"BMC Air Filter FB536\/08 – BMW M3 (E90\/E92\/E93, U.S. 2010–2013)","description":"\u003ch2 style=\"text-align: center;\"\u003eHigh-Flow Replacement Filter for the U.S.-Spec E9x M3 (2010–2013)\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBMC Air Filter FB536\/08\u003c\/strong\u003e is a drop-in \u003cem\u003ecylindrical\u003c\/em\u003e element designed for the \u003cstrong\u003eU.S.-market BMW M3 E90\/E92\/E93 models from 2010–2013\u003c\/strong\u003e equipped with the S65 4.0L V8. Built with BMC’s Full-Moulding red rubber frame and multi-layer oiled cotton gauze supported by epoxy-coated mesh, it delivers increased airflow while filtering particles down to ~\u003cstrong\u003e7 microns\u003c\/strong\u003e—significantly tighter than typical OEM paper (~10 µm). Washable, reusable, and engineered for an OEM-quality seal in the stock airbox.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose the BMC FB536\/08 Air Filter?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow \u0026amp; Protection:\u003c\/strong\u003e Higher intake flow while capturing fine particulates ≥ 7 µm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashable \u0026amp; Reusable:\u003c\/strong\u003e Easily serviced with the BMC regeneration kit—no disposable paper filters needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e One-piece Full-Moulded red rubber frame ensures rigidity and long-term sealing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Style Fitment:\u003c\/strong\u003e Direct drop-in replacement for the 2010–2013 U.S.-spec E9x M3 airbox.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment \u0026amp; Vehicle Compatibility\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOEM Cross Reference\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBMW \u003cstrong\u003e13727838804\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Models (U.S.-Spec)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eBMW M3 (E90 Sedan)\u003c\/strong\u003e — 4.0L V8, 2010–2011\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBMW M3 (E92 Coupé)\u003c\/strong\u003e — 4.0L V8, 2010–2013\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBMW M3 (E93 Convertible)\u003c\/strong\u003e — 4.0L V8, 2010–2013\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFilter Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCylindrical replacement element (“unique” style)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInside Ø 122 mm × Outside Ø 220 mm × Length 236 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePre-oiled multi-layer cotton gauze with epoxy-coated alloy mesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFiltration Efficiency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~7 µm (vs. ~10 µm typical OEM paper)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 × Cylindrical Air Filter (FB536\/08)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-Year Limited Coverage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"margin-top: 6px;\"\u003eThis filter fits only **U.S.-spec BMW M3 E90\/E92\/E93 from 2010–2013**. For earlier U.S. models (2008–2009), use BMC FB577\/08. Always confirm via VIN before purchasing.\u003c\/p\u003e\n\u003ch3\u003eThe BMC Advantage\u003c\/h3\u003e\n\u003cp\u003eMotorsport-proven engineering provides smoother airflow, sharper throttle response, and long-term reliability—tailored for the S65 V8 in your M3.\u003c\/p\u003e\n\u003cp\u003eNeed install help? Visit our \u003ca href=\"\/pages\/installation-guide\" title=\"BMC Air Filter Installation Guide\"\u003eInstallation Guide\u003c\/a\u003e or explore the \u003ca href=\"\/collections\/bmw-air-filters\" title=\"BMC Air Filter Collection For BMW Cars\"\u003e\u003cstrong\u003eBMW Air Filter Collection\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEquip your 2010–2013 U.S. M3 with the BMC FB536\/08 air filter—engineered for airflow, protection, and endurance.\u003c\/strong\u003e\u003c\/p\u003e","brand":"BMC","offers":[{"title":"Default Title","offer_id":48864398541050,"sku":"FB536\/08","price":125.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/2745\/3434\/files\/bmc-air-filter-fb536-08-bmw-m3-e92-front_e7178775-0b8f-427d-971e-61ed6077ef9d.jpg?v=1778766479"},{"product_id":"bmc-air-filter-fb577-08-bmw-m3-e90-e92-e93-u-s-2007-2009","title":"BMC Air Filter FB577\/08 – BMW M3 (E90\/E92\/E93, U.S. 2007–2009)","description":"\u003ch2 style=\"text-align: center;\"\u003eHigh-Flow Replacement Filter for Early U.S. E9x M3 (2007–2009)\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBMC Air Filter FB577\/08\u003c\/strong\u003e is a drop-in \u003cem\u003ecylindrical\u003c\/em\u003e element designed specifically for the \u003cstrong\u003eU.S.-market BMW M3 E90\/E92\/E93 models from 2007–2009\u003c\/strong\u003e equipped with the S65 4.0L V8. Built with BMC’s signature Full-Moulding red rubber frame and multi-layer oiled cotton gauze reinforced by epoxy-coated alloy mesh, it delivers increased airflow while filtering particles down to \u003cstrong\u003e~7 microns\u003c\/strong\u003e, outperforming OEM paper (~10 µm). Washable, reusable, and engineered for a perfect OEM-style seal.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose the BMC FB577\/08 Air Filter?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Airflow \u0026amp; Protection:\u003c\/strong\u003e Greater intake volume with fine particulate filtration ≥ 7 µm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashable \u0026amp; Reusable:\u003c\/strong\u003e Service with BMC’s regeneration kit—no more disposable filters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Full-Moulded Design:\u003c\/strong\u003e Seamless red rubber frame for strength and long-term sealing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Style Fitment:\u003c\/strong\u003e Direct drop-in replacement for U.S. E9x M3 airboxes (2007–2009 build years).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment \u0026amp; Vehicle Compatibility\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOEM Cross Reference\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBMW \u003cstrong\u003e13727838804\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Models (U.S.-Spec)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eBMW M3 (E90 Sedan)\u003c\/strong\u003e — 4.0L V8, 2008–2009 (early U.S. production)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBMW M3 (E92 Coupé)\u003c\/strong\u003e — 4.0L V8, 2007–2009\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBMW M3 (E93 Convertible)\u003c\/strong\u003e — 4.0L V8, 2008–2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFilter Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCylindrical replacement element (“unique” style)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInside Ø 122 mm × Outside Ø 220 mm × Length 236 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePre-oiled multi-layer cotton gauze with epoxy-coated alloy mesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFiltration Efficiency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~7 µm (vs. ~10 µm typical OEM paper)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 × Cylindrical Air Filter (FB577\/08)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-Year Limited Coverage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"margin-top: 6px;\"\u003eThis filter is correct for **U.S.-spec BMW M3 E90\/E92\/E93 built from 2007 through 2009**. For later U.S. models (2010–2013), use BMC FB536\/08. Always confirm fitment via VIN.\u003c\/p\u003e\n\u003ch3\u003eThe BMC Advantage\u003c\/h3\u003e\n\u003cp\u003eBMC’s motorsport-proven engineering ensures smoother airflow, improved throttle response, and long-term value—tailored for the S65 V8 in early-production M3s.\u003c\/p\u003e\n\u003cp\u003eNeed install help? Visit our \u003ca title=\"BMC Air Filter Installation Guide\" href=\"\/pages\/installation-guide\"\u003eInstallation Guide\u003c\/a\u003e or browse the \u003ca title=\"BMC Air Filter Collection For BMW Cars\" href=\"\/collections\/bmw-air-filters\"\u003e\u003cstrong\u003eBMW Air Filter Collection\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEquip your 2007–2009 U.S. M3 with the BMC FB577\/08 air filter—engineered for airflow, protection, and durability.\u003c\/strong\u003e\u003c\/p\u003e","brand":"BMC","offers":[{"title":"Default Title","offer_id":48864399655162,"sku":"FB577\/08","price":125.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/2745\/3434\/files\/bmc-air-filter-fb577-08-bmw-m3-e92-front.jpg?v=1778766485"},{"product_id":"eventuri-bmw-e9x-m3-s65-black-carbon-inlet-plenum-gloss","title":"Eventuri BMW E9X M3 (S65) Black Carbon Inlet Plenum - Gloss","description":"\u003cp\u003eIntroducing the E9X M3 Carbon Fiber Plenum from Eventuri. Made from 100% high grade prepreg carbon including the internal trumpets, this plenum replaces the stock plastic version and unleashes the roar of the naturally aspirated BMW V8 engine. Since the trumpet lengths are tuned by BMW to the internal volume, changing this could result in a loss of performance so we kept the same volume to not upset the way the car drives in terms of power delivery. Although there isn’t a performance gain from the carbon plenum, the induction sound generated takes the driving experience of the M3 to a whole new level. The raw V8 rumble gives the M3 an almost CSL like sound and is truly an intoxicating experience. We went through several iterations using different carbon thicknesses to fine tune the sound and the resulting plenum generates an almost unbelievable induction volume and tone.\u003c\/p\u003e\n\u003cp\u003e*Some images shown with the optional Carbon Intake and Airbox Lid. M and V8 badges are optional.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEach Plenum consists of:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fiber base and Lid (bonded as one piece prior to shipment)\u003c\/li\u003e\n\u003cli\u003e8 x Carbon trumpets with OEM specifications\u003c\/li\u003e\n\u003cli\u003e8 x CNC machined aluminum flanges\u003c\/li\u003e\n\u003cli\u003eCNC machined temperature sensor boss\u003c\/li\u003e\n\u003cli\u003eCNC machined breather boss\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e*This item is not eligible for return*\u003c\/strong\u003e\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":48888505532666,"sku":"EVE-E9X-CF-PLM","price":2465.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/2745\/3434\/files\/Eventuri_E9X_M3_Carbon_Inlet_Plenum_2.jpg?v=1778766577"},{"product_id":"eventuri-bmw-e9x-m3-s65-black-carbon-airbox-lid-gloss","title":"Eventuri BMW E9X M3 (S65) Black Carbon Airbox Lid - Gloss","description":"\u003cp\u003e\u003cspan\u003eEventuri E9X M3 Airbox lid is a direct replacement for the OEM plastic version. Crafted from Prepreg Carbon Fiber it allows for more intake sound to be heard as compared to the OEM lid. Available in black carbon and colored Kevlar options. The fitment is perfect and secures in the same way as the stock part.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*This item is not eligible for return*\u003c\/strong\u003e\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":48888505565434,"sku":"EVE-E9X-CF-ARB","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/2745\/3434\/files\/bmw_e92_m3_eventuri_carbon_airbox_lid_5_1_bf3f5fbc-d836-4ae1-b9bc-59d4206f3aa9.jpg?v=1778766580"},{"product_id":"eventuri-bmw-e9x-m3-s65-black-carbon-inlet-plenum-matte","title":"Eventuri BMW E9X M3 (S65) Black Carbon Inlet Plenum - Matte","description":"\u003cp\u003eIntroducing the E9X M3 Matte Carbon Fiber Plenum from Eventuri. Made from 100% high grade prepreg carbon including the internal trumpets, this plenum replaces the stock plastic version and unleashes the roar of the naturally aspirated BMW V8 engine. Since the trumpet lengths are tuned by BMW to the internal volume, changing this could result in a loss of performance so we kept the same volume to not upset the way the car drives in terms of power delivery. Although there isn’t a performance gain from the carbon plenum, the induction sound generated takes the driving experience of the M3 to a whole new level. The raw V8 rumble gives the M3 an almost CSL like sound and is truly an intoxicating experience. We went through several iterations using different carbon thicknesses to fine tune the sound and the resulting plenum generates an almost unbelievable induction volume and tone.\u003c\/p\u003e\n\u003cp\u003e*Some images shown with the optional Matte Carbon Intake and Airbox Lid. M and V8 badges are optional. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEach Plenum consists of:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fibre base and Lid\u003c\/li\u003e\n\u003cli\u003e8 x Carbon trumpets with OEM specifications\u003c\/li\u003e\n\u003cli\u003e8 x CNC machined aluminum flanges\u003c\/li\u003e\n\u003cli\u003eCNC machined temperature sensor boss\u003c\/li\u003e\n\u003cli\u003eCNC machined breather boss \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e*This item is not eligible for return*\u003c\/strong\u003e\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":48888505598202,"sku":"EVE-E9X-CFM-PLM","price":2465.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/2745\/3434\/files\/51831281359_0282ea3e0e_b.jpg?v=1778766582"},{"product_id":"eventuri-bmw-e9x-m3-s65-black-carbon-intake-system-matte","title":"Eventuri BMW E9X M3 (S65) Black Carbon Intake System - Matte","description":"\u003cp\u003e\u003cstrong\u003ePerformance Gain Dyno: 8-10hp, 10-12ft-lb\u003cbr\u003ePerformance Gain Road Dyno (Insoric): 16hp, 14Nm\u003cbr\u003eIAT Difference with Ambient: Stock 7.5C : Eventuri 4.5C\u003cbr\u003eV-Box Acceleration : 100-200kph Reduced By 0.3 Seconds\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe BMW E9X M3 Eventuri intake system is the result of extensive research and optimization which improves possibly one of the best designed stock intake systems we have seen. The E9X stock airbox system is a brilliantly designed intake with an excellent flow path and feed system for ambient air. However on closer inspection, there are restrictions in the inlet tube connecting the airbox to the inlet manifold. By redesigning the tube yet maintaining the airbox, we have been able to allow the V8 engine to breathe with greater efficiency and therefore gain power. In addition to the new tube design, we also identified a further restriction in the air feed system. To overcome this we designed a scoop to allow an increase in airflow through the airbox. This reduces inlet temperature values further and adds to the performance gain of the system.\u003c\/p\u003e\n\u003cp\u003eThe Eventuri E9X M3 intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. Here are the details for each component and the design ethos behind them:\u003c\/p\u003e\n\u003cp\u003e*Some images shown with the S65 Carbon Inlet Plenum and Optional Airbox Lid.\u003c\/p\u003e\n\u003cp\u003eInstallation guide is available \u003ca href=\"https:\/\/www.dropbox.com\/scl\/fi\/ahxr083s7mvd6vd0ecd0l\/E9X-M3-Installation-Guide2.pdf?rlkey=reslfbvlk1zy2lnmaxtajvygh\u0026amp;st=b2qm7xn8\u0026amp;dl=0\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEach intake system consists of:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fibre Intake Tube\u003c\/li\u003e\n\u003cli\u003eHigh Flow Urethane Cone Filter\u003c\/li\u003e\n\u003cli\u003eCarbon Fibre Inlet Scoop\u003c\/li\u003e\n\u003cli\u003eCNC Machined breather adapter\u003c\/li\u003e\n\u003cli\u003eLaser Cut Stainless Steel Debris Guard\u003c\/li\u003e\n\u003cli\u003eSilicon Coupler and OEM specification clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e*This item is not eligible for return*\u003c\/strong\u003e\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":48888505630970,"sku":"EVE-E9X-CFM-INT","price":965.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/2745\/3434\/files\/51899722971_9a9147a875_b.jpg?v=1778766586"},{"product_id":"eventuri-bmw-e9x-m3-s65-black-carbon-airbox-lid-matte","title":"Eventuri BMW E9X M3 (S65) Black Carbon Airbox Lid - Matte","description":"\u003cp\u003e\u003cspan\u003eEventuri E9X M3 Airbox lid is a direct replacement for the OEM plastic version. Crafted from Prepreg Carbon Fibre it allows for more intake sound to be heard as compared to the OEM lid. Available in matte black carbon. The fitment is perfect and secures in the same way as the stock part.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e** This item is not eligible for return **\u003c\/strong\u003e\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":48888505663738,"sku":"EVE-E9X-CFM-ARB","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/2745\/3434\/files\/51900051384_89bef1c019_b.jpg?v=1778766588"},{"product_id":"eventuri-bmw-e9x-m3-s65-black-carbon-intake-system-gloss","title":"Eventuri BMW E9X M3 (S65) Black Carbon Intake System - Gloss","description":"\u003cp\u003e\u003cstrong\u003ePerformance Gain Dyno: 8-10hp, 10-12ft-lb\u003cbr\u003e\n  Performance Gain Road Dyno (Insoric): 16hp, 14Nm\u003cbr\u003e\n  IAT Difference with Ambient: Stock 7.5C : Eventuri 4.5C\u003cbr\u003e\n  V-Box Acceleration : 100-200kph Reduced By 0.3 Seconds\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe BMW E9X M3 Eventuri intake system is the result of extensive research and optimization which improves possibly one of the best designed stock intake systems we have seen. The E9X stock airbox system is a brilliantly designed intake with an excellent flow path and feed system for ambient air. However on closer inspection, there are restrictions in the inlet tube connecting the airbox to the inlet manifold. By redesigning the tube yet maintaining the airbox, we have been able to allow the V8 engine to breathe with greater efficiency and therefore gain power. In addition to the new tube design, we also identified a further restriction in the air feed system. To overcome this we designed a scoop to allow an increase in airflow through the airbox. This reduces inlet temperature values further and adds to the performance gain of the system.\u003c\/p\u003e\n\u003cp\u003eThe Eventuri E9X M3 intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. Here are the details for each component and the design ethos behind them:\u003c\/p\u003e\n\u003cp\u003e*Some images shown with the S65 Carbon Inlet Plenum and Optional Airbox Lid.\u003c\/p\u003e\n\u003cp\u003eInstallation guide is available \u003ca target=\"_blank\" href=\"https:\/\/www.dropbox.com\/scl\/fi\/ahxr083s7mvd6vd0ecd0l\/E9X-M3-Installation-Guide2.pdf?rlkey=reslfbvlk1zy2lnmaxtajvygh\u0026amp;st=b2qm7xn8\u0026amp;dl=0\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEach intake system consists of:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fibre Intake Tube\u003c\/li\u003e\n\u003cli\u003eHigh Flow Urethane Cone Filter\u003c\/li\u003e\n\u003cli\u003eCarbon Fibre inlet Scoop\u003c\/li\u003e\n\u003cli\u003eCNC Machined breather adapter\u003c\/li\u003e\n\u003cli\u003eLaser Cut Stainless Steel Debris Guard\u003c\/li\u003e\n\u003cli\u003eSilicon Coupler and OEM specification clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e** This item is not eligible for return **\u003c\/strong\u003e\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":48888506220794,"sku":"EVE-E9X-CF-INT","price":965.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/2745\/3434\/files\/eventuri_intake_c10c33a5-d301-46a6-b70b-e202031189fd.jpg?v=1778766629"},{"product_id":"eventuri-bmw-e9x-m3-carbon-duct-set-gloss","title":"Eventuri BMW E9X M3 Carbon Duct Set - Gloss","description":"\u003cp\u003e\u003cstrong\u003e*Some images show our optional Carbon Plenum, Intake and Airbox Lid.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur E9X M3 carbon ducts are a direct replacement for the OEM plastic ducts to bring that finishing touch to the engine bay. These ducts are made using prepreg carbon and match the rest of our E9X M3 line up for the ultimate OEM+ theme. We have also replaced the flexible joining piece between the ducts and the airbox with an EPDM coupler featuring our raised V logo. During development, consideration was given to add scoops to the front duct but after analysis we found there was no performance benefit due to the small opening between the ducts and the airbox so we opted not to add scoops. This also leaves the grill openings unobstructed for optimum flow to the radiator.\u003c\/p\u003e\n\u003cp\u003eThe Eventuri carbon ducts are available in both gloss and matte finish to match our plenum, intake and airbox lid.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fiber front duct\u003c\/li\u003e\n\u003cli\u003eCarbon fiber rear duct\u003c\/li\u003e\n\u003cli\u003eCustom EPDM coupler\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":48888506417402,"sku":"EVE-E9X-CF-DCT","price":775.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/2745\/3434\/files\/51884423041_f97fd62106_b.jpg?v=1778766639"},{"product_id":"eventuri-bmw-e9x-m3-s65-colored-kevlar-intake-system-yellow","title":"Eventuri BMW E9X M3 (S65) Colored Kevlar Intake System - Yellow","description":"\u003cp\u003eThe BMW E9X M3 Eventuri intake system is the result of extensive research and optimization which improves possibly one of the best designed stock intake systems we have seen. The E9X stock airbox system is a brilliantly designed intake with an excellent flow path and feed system for ambient air. However on closer inspection, there are restrictions in the inlet tube connecting the airbox to the inlet manifold. By redesigning the tube yet maintaining the airbox, we have been able to allow the V8 engine to breathe with greater efficiency and therefore gain power. In addition to the new tube design, we also identified a further restriction in the air feed system. To overcome this we designed a scoop to allow an increase in airflow through the airbox. This reduces inlet temperature values further and adds to the performance gain of the system.\u003c\/p\u003e\n\u003cp\u003eThe Eventuri E9X M3 intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. Here are the details for each component and the design ethos behind them: \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEach intake system consists of:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Kevlar Intake Tube\u003c\/li\u003e\n\u003cli\u003eHigh Flow Urethane Cone Filter\u003c\/li\u003e\n\u003cli\u003eCarbon Fibre inlet Scoop\u003c\/li\u003e\n\u003cli\u003eCNC Machined breather adapter\u003c\/li\u003e\n\u003cli\u003eLaser Cut Stainless Steel Debris Guard\u003c\/li\u003e\n\u003cli\u003eSilicon Coupler and OEM specification clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e** This item is not eligible for return **\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePerformance Gain Dyno: 8-10hp, 10-12ft-lb\u003cbr\u003ePerformance Gain Road Dyno (Insoric): 16hp, 14Nm\u003cbr\u003eIAT Difference with Ambient: Stock 7.5C : Eventuri 4.5C\u003cbr\u003eV-Box Acceleration : 100-200kph Reduced By 0.3 Seconds\u003c\/p\u003e\n\u003cp\u003eRead More \u003ca href=\"http:\/\/ind-style.com\/eventuri-e9x-m3-carbon-fiber-intake-system\/\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Yellow Kevlar","offer_id":48888506450170,"sku":"EVE-E9X-KV-INT-Y","price":1139.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/2745\/3434\/files\/53187890070_bbebece315_b.jpg?v=1778766641"},{"product_id":"bmw-m3-e92-valved-exhaust-with-mid-pipes-ces3","title":"BMW M3 (E92) - Valved Exhaust + MidPipes (CES3)","description":"\u003cp\u003e\u003cstrong\u003e\u003cb\u003eDemand the Best. Demand Capristo.\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCapristo Exhaust Systems are engineered and manufactured exclusively at our factory in Sundern, Germany, utilizing advanced 3D laser-scanning, CAD design, digital prototyping, and CNC-bending\/milling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Highlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% Made in Sundern, Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eHighest Grade\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/capristoexhaust.com\/pages\/engineering\"\u003eT309 (1.4828) Stainless Steel\u003c\/a\u003e; similar resonance properties to Inconel, notably used in F1\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eProprietary Valves Manufactured by Capristo\u003c\/li\u003e\n\u003cli\u003ePatented Reinforced Design to Eliminate Resonance\u003c\/li\u003e\n\u003cli\u003eManually TIG Welded by Capristo Craftsmen\u003c\/li\u003e\n\u003cli\u003eHand Polished to a Mirror Finish Post-Weld\u003c\/li\u003e\n\u003cli\u003eProprietary Module to Handle Valve Control\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0619\/0612\/4898\/files\/2023_05_08_EVCU-1_A5_Neues_Layout_Lo.pdf?v=1764782389\"\u003eCES3 \/ EVCU1 Installation\/User Manual\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0619\/0612\/4898\/files\/BMW_E92_M3_428i_435i_-_Vacuum_Adapter_Installation_Guide.pdf?v=1761249625\"\u003eVacuum Adapter Installation Guide\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003ciframe title=\"BMW M3 [E92 Coupe] ESS Tuning VT2-625 Supercharger \u0026amp; Capristo Exhaust System | MM-Performance.pl\" src=\"https:\/\/www.youtube.com\/embed\/qnLboMF6HOc\" height=\"729\" width=\"1296\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Capristo Exhaust","offers":[{"title":"Default Title","offer_id":48888551604474,"sku":"02BM05603001","price":6500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/2745\/3434\/files\/e84e7e79-M3-E92_1.jpg?v=1778767873"},{"product_id":"eventuri-bmw-e9x-m3-s65-black-carbon-airbox-lid-gloss-1","title":"Eventuri BMW E9X M3 (S65) Black Carbon Airbox Lid - Gloss","description":"\u003cp\u003eThe Eventuri BMW E9X M3 Black Carbon Airbox Lid is a precision-engineered upgrade designed specifically for the legendary S65 V8 engine. Recognizing that the factory airbox was co-developed by BMW alongside the Williams Formula 1 team, Eventuri took a measured approach to enhance the system without disrupting the integrity of one of BMW M’s most celebrated intake designs.\u003c\/p\u003e\n\u003cp\u003eRather than redesigning a highly optimized factory component, Eventuri focused on refining a single visual and acoustic element — the airbox lid. This carbon fiber replacement retains the OEM airbox architecture while elevating the induction character of the S65, allowing more of the engine’s unmistakable tone to be experienced from the driver’s seat.\u003c\/p\u003e\n\u003cp\u003eConstructed from 100% prepreg carbon fiber and finished in a deep gloss clear coat, the lid delivers exceptional surface clarity, structural consistency, and heat resistance. The signature 2x2 twill weave complements both factory carbon accents and Eventuri’s intake and plenum upgrades, creating a cohesive, motorsport-inspired engine bay aesthetic.\u003c\/p\u003e\n\u003cp\u003eDesigned as a direct replacement for the factory plastic lid, installation is straightforward and utilizes all original BMW mounting locations and hardware. The result is an OEM-level fit paired with a distinctly premium visual upgrade worthy of the high-revving S65 platform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits all BMW E9X M3 models with the S65 V8 engine\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the OEM plastic airbox lid\u003c\/li\u003e\n\u003cli\u003eManufactured from 100% prepreg carbon fiber\u003c\/li\u003e\n\u003cli\u003eGloss clear-coated finish\u003c\/li\u003e\n\u003cli\u003eSignature 2x2 twill carbon weave\u003c\/li\u003e\n\u003cli\u003eUtilizes factory BMW mounting points and hardware for precise fitment\u003c\/li\u003e\n\u003cli\u003eEnhances induction sound while preserving the original airbox design\u003c\/li\u003e\n\u003cli\u003eCarbon weave matches Eventuri intake and optional carbon plenum upgrades\u003c\/li\u003e\n\u003cli\u003eEngineered for OEM-level fit and long-term durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned and hand-assembled in the UK\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eThis item is not eligible for return once opened\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eWarranty coverage and damage-in-transit support are fully provided\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/ind-distribution.com\/pages\/faq#faq-emissions-notice\"\u003eView emissions compliance notice\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":48966454804730,"sku":"EVE-E9X-CF-ARB","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/2745\/3434\/files\/eventuri-e9x-m3-s65-gloss-carbon-airbox-lid-2.jpg?v=1780584694"}],"url":"https:\/\/taurinoracing.com\/collections\/bmw-3-4-series-m3-e92.oembed","provider":"Taurino Racing","version":"1.0","type":"link"}