Lamborghini Huracan Super Trofeo EVO – Rear Brake Pads (Purple Race) – Taurino Racing
- Additional information
- Reviews (0)
Fitment for Lamborghini Huracan Super Trofeo EVO
**does not fit the revised EVO2 Brake System**
This pad is a specially formulated compound selected by Taurino Racing for optimum performance at Road Courses around North America. We personally tested multiple compounds on all three chassis before selecting our front (YELLOW) and rear (PURPLE) formulations.
• High friction coefficient and high initial bite
• Reproducible and stable performance up to 850°C under all pressure and speed conditions
• ABS compatible
• Longest pad life of TR Racing range under heavy duty track use
• Recommended for track use on larger vehicles with ABS such as GT4 and GT3.
• Recommended for sprint and medium duration races (up to 6 hours)
The aim of bedding is to bring the pads to full race temperatures, but gradually (too quickly results in glazing). This is done by a series of applications up to race speeds, but in which lighter braking pressures are used (i.e. the driver applies the brakes earlier). It is important that the pads are allowed to cool between the bedding and racing. But if time does not allow, they can be used immediately though less product life, possibly 10%, should be expected.Taurino Racing’s Pads have undergone an intense thermal treatment up to full bedding temperatures during their production. The general procedure is to be applied as below but arriving at the 500°C target temperature is not critical. The number of applications may also be reduced. In these thermally treated compounds, bedding is required only as mechanical mating of pad and disc. Pads smoking during the cool-down is not a cause for concern. Temperatures should arrive at between 500°C and 700°C (as an indication: green thermal paint applied to discs should completely change and from half to all of the orange paint should change.)
It may be necessary to close cooling ducts during the bedding to achieve sufficiently high temperatures.
Perform at least 15 trial brake applications, initially with reduced pressures (around 50% of the normal that might be used for that same brake application were it to occur under race conditions) building up to full decelerations after the 15 applications. To shorten the procedure applications can be made along the straights as well as at corners.
On completion of the trial applications, return to a service point and let the pads cool and then inspect the surface of the brake pads from the two wheels that have been working the hardest. There should be evidence of contact over the full pad area, but without glazing. The pads are now ready to race.
Whilst it is recommended that pads are inspected after bedding, time may not allow this. But as long as the gradual build-up procedure has been carried out correctly and a short period of time has elapsed to allow the brake system to cool (ideally to below 100°C – this might take in excess of five minutes), the pads will be ready to race.
To illustrate these principles please consider the figures below:
Figure 1 below shows data from a GT3 car during bedding.
Figure 2 is from the same car under race conditions on the same circuit.
The red plot shows brake pressure against time; the green plot shows disc temperature against time.
The red plots show the brake pressures during the bedding-in cycle at around 50% of those seen in race conditions.
The gradual build-up of temperature during the bedding can be seen peaking at 580°C, which is quite close to the full race temperature.
Figures 3 and 4 below illustrate the appearance of Taurino pads that have been properly bedded-in. The pad surface is even, with a dull sheen.
Figure 5 – Example of Taurino pad that has not been properly bedded. In this case the final disc temperatures reached were not sufficient and/or insufficient applications were made to allow mechanical mating. In this case pad surface has a non-uniform appearance and these streaks may have a glassy appearance.
All Taurino Racing brake pads are solely developed for motorsport use. They are intended for race use only. They have not been developed for use on public roads and must not, under any circumstances, be used on public roads. The nature of racing prevents Taurino Racing from warranting or guaranteeing any aspect of the behavior or performance of the brake pads, specifically because motorsport is inherently dangerous and the use of Taurino Racing racing brake pads in motorsport results in inherent strains and uses over which Taurino Racing has no control.
Taurino Racing warrants only that the our racing brake pads have been manufactured in accordance with the manufacturing specifications and design for such pads.
In particular, and without in any way limiting the scope of the foregoing disclaimer, no warranty or guarantee, express or implied, is made as to the ability of the Taurino Racing brake pads to protect the user from injury or death. By the usage of such racing brake pads the user explicitly assumes all said risks.
FURTHER TO THE FOREGOING, EXCEPT FOR THE EXPRESS WARRANTY GIVEN IN THE RESPECT OF CONFORMITY OF THE RACING BRAKE PADS TO THE MANUFACTURING SPECIFICATIONS, TAURINO RACING DISCLAIMS ANY AND ALL WARRANTIES Of ANY KIND, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
All test results above are based on variouos internal and external performance and driving tests including specific personal recommandations by experienced test
|Dimensions||9 × 6 × 3 in|
Only logged in customers who have purchased this product may leave a review.